We’ve all been there – you’re enjoying a nice relaxing evening, or a much-needed, calming bath when, all of a sudden, clink, bank, clatter - your cylinder or tank starts to make the most unbearable noises!
Fortunately, hope is not lost. This Salamander 1” x 22mm Compression Top Entry Flange S/FLANGE is here to help! Encouraging the air in your pump to follow a specific path to the vent, the flange prevents aerated supply water from being drawn into the pump and, as such, reduces the risk of the pump becoming noisy, breaking down, or suffering from premature temperature fluctuations.
Suitable for use with all Salamander pumps, and supplied complete with a 2 Year Manufacturer’s Guarantee, this Top Entry Flange will perform to the highest possible standard for years to come.
Reduces the risk of airlock, extra noise, and interrupted flow
Supplied complete with 2 year Manufacturer’s Guarantee
Compression Top Entry Flange 1" x 22mm - SFLANGEVideo
Compression Top Entry Flange 1" x 22mm - SFLANGE
PWSM0030
£34.40(Inc. VAT)
Stock status:✓
In Stock
FREE DELIVERY
365 Day Returns
Returns Policy - Changed Your Mind?
If you change your mind about the product when you receive it you can notify us any time within 365 days and return it for a full refund at your own cost. Any refunds will be made within 14 days of receiving your returned item. You are expected to cover the cost to return the item and your initial delivery charge will not be refunded.
my shower was sucking in air,and giving me troubles.
the salamander s flange was advised.
i fitted this,pretty straight forward job.just had to tweek outlet pipe up a inch or two,a bit of ptfe tape and all went back ok.
this is a good bit of kit,and did what it was designed to do.also in creased flow.maybe because no are was getting in to shower.
i would recommend this to anyone with air problems.
i also got this delivered quickly after ordering on line.A1 service from shower pumps. will be using them again,for sure.
jaykay
5/ 5
Mark D
rated this
5/5
★★★★★
If you have issues with poor flow/air in your pumped,indirect cylinder/tank fed,shower then this item is the solution for you. This will resolve the common error where the hot feed/draw pipe(to shower pump)has been wrongly tee’d into the top of the cylinder/expansion pipe outlet. Fitting the Sflange will prevent the draw of air (from expansion pipe) in situations where you have a minimal amount of hight(head) on your tank fed system. This item resolved my issue.thanks.
5/ 5
Toby Cohen
rated this
5/5
★★★★★
Haven't tried other makes but this does the job perfectly. I was fortunate with the orientation of the pump outlet once it was tightened up, but I suppose an improved design idea would be to be able to rotate the outlet to the desired angle, banjo bolt style ...or shimming would be a cheaper option I guess. Cheapest price I could find was here on Plumbworld. Turned up fast and well packaged.
5/ 5
Sam
rated this
5/5
★★★★★
This salamander flange is essential if your fitting a shower or whole house pump. Although its not the best looking flange, they are very easy to install, I can vouch for this as I've fitted dozens of them
5/ 5
Dido
rated this
5/5
★★★★★
Excellent product and service from plumb world. Arrived in double-quick time, was competitively priced and was exactly what I needed. Will definitely use this company again. Highly recommended
5/ 5
Marc Peacock
rated this
5/5
★★★★★
Best way to supply hot water to a shower pump. Easy to fit and position because of the 2 washers supplied. Helps to comply with Salamander pumps warranty conditions.
5/ 5
David Elliott
rated this
5/5
★★★★★
Easy to install and works perfectly. Essential these are fitted when fitting a pump to a conventional hot water tank system to prevent air getting in the pump.
5/ 5
Clare
rated this
5/5
★★★★★
Easy to fit, no need for additional compression fittings, no need to drain cylinder, stops air drag through Hot water vent.
5/ 5
Simon
rated this
5/5
★★★★★
Worked perfectly. Haven't use any other flange and bought on the basis of matching up with a Salamander pump.
5/ 5
Bob
rated this
5/5
★★★★★
Easy to fit to cylinder which had an 1 taping. It works very well with its different options.
