Stuart Turner Techflo TP Single Impeller Positive Head 2.0 Bar Shower Pump - 49086
16 reviews
£108.00(Inc. VAT)
✗
Expected - 02/11/24
FREE DELIVERY
Plumbworld has the lowest price for this product!
Description−
The Stuart Turner Techflo TP Standard 2.0 Bar Single Impeller Shower Pump is designed to help improve your hot or cold water supply to a tap or to pump mixed water from a shower mixer. This pump will help maximise the pressure of your water to make the flow of your tap or shower more powerful.
Actual comparative tests under laboratory conditions confirm that Stuart Turner manufactures the quietest peripheral (regenerative) shower pump available.
Continuously Rated Motor
Continuously rated shower pumps effectively run until the user turns it off. This is particularly good in a family home where the shower needs to be used frequently throughout the morning or evening. A pump that isn’t continuously rated will turn itself off to allow the pump to cool, potentially causing issues with water pressure to the shower.
Single Impeller Shower Pump is designed to help improve your hot or cold water supply to a tap or to pump mixed water from a shower mixer. This pump will help maximise the pressure of your water to make the flow of your tap of shower more powerful.
Positive Head
A positive head shower pump is designed to be gravity fed, therefore it needs a 'head' of distance (at least a metre) between the pump and the bottom of the cold water cistern. The gravity feed 'kick-starts' the pump, pushing water straight through to your shower.
Flexible hoses included
This shower pump comes complete with two flexible hoses, which are used to link your shower pump to both incoming and outgoing water pipes. These flexible hoses are anti-vibration which means the hoses are less prone to vibration from the pump, helping to reduce noise and prevent damage to the pump itself.
WRAS Approved for quality
If you’re buying any sort of water fitting or product then it’s important that its WRAS (Water Regulations Advisory Scheme) approved. It’s the best way to work out if that particular product or part complies with the UK requirements for installation within the UK.
Stuart Turner Techflo TP Single Impeller Positive Head 2.0 Bar Shower Pump - 49086 Specifications
Construction
Plastic
Feed Compatibility
Single - Hot OR Cold
Installation
Positive Head
Output
2
Bar
Pump Type
Centrifugal
Stuart Turner Techflo TP Single Impeller Positive Head 2.0 Bar Shower Pump - 49086
49086
Save £8.38Was
£116.38
£108.00(Inc. VAT)
Stock status:✗
Expected - 02/11/24
FREE DELIVERY
365 Day Returns
Returns Policy - Changed Your Mind?
If you change your mind about the product when you receive it you can notify us any time within 365 days and return it for a full refund at your own cost. Any refunds will be made within 14 days of receiving your returned item. You are expected to cover the cost to return the item and your initial delivery charge will not be refunded.
I bought this pump to replace a much more expensive pump that had been replaced 3 times over the years with the same make and model.This Stuart Turner pump is performing very well, plenty of power and very quite as well compared to its predecessors.
I like the fact that it is quite a simple uncomplicated design, Less to go wrong !
Up to now, no complaints or problems.
5/ 5
Andy Thomson
rated this
5/5
★★★★★
New fitted kitchen resulted in very poor flow from hot water caused by flexi hoses with tiny bores on fancy tap. Cold water was fine as it was mains pressure but hot water is gravity fed from tank. This easily fitted pump has sorted the problem and the hot water flow is now almost as strong as the cold. Also I am pleasantly surprised at how quiet running the pump is.
5/ 5
Mark Smith
rated this
5/5
★★★★★
This is a great value for money pump. I bought it to increase the pressure of my hot water feed to a mixer shower. I bought this one based on reviews and also because of its size as I had very limited space to fit it in. The pump is also very very quiet and easy to fit. I full recommend it. Great service from Plumbworld to thanks.
5/ 5
Eric C
rated this
5/5
★★★★★
This unit is relatively quiet, helped by the supplied flexible hoses and rubber feet. I used a piece foam packaging to further reduce vibration being coupled down to the floor. Really enlivened a weak shower to proper flow. Item arrived on a Saturday within 20 hours or ordering - awesome!
5/ 5
Bruce Williams
rated this
5/5
★★★★★
Had a problem after fitting a new kitchen for a customer with gravity feed hot weather system and a mono bloc tap. Fitted this little beauty in half an hour and plenty of hot water now. Reasonably quiet and excellant flow rate - highly reccomended.
5/ 5
Brian Brooks
rated this
5/5
★★★★★
cracking little pump, my hot flow needed a boost after a bathroom make over as I had fitted high pressure taps the flow from the bath tap was so bad it took 45 mins to fill, it is now better than my cold mains!!!
5/ 5
Stuart
rated this
5/5
★★★★★
I ordered a single Impeller when I needed a Double Impeller, Plumbworld dispatched the correct one next day and processed the return with 2 days, excellent customer service.
5/ 5
Dave Lumby
rated this
5/5
★★★★★
I'm using this pump to take water from storage buts and water the garden. It works well for my needs and I suspect it would do the same on a shower.
5/ 5
Aaron Rao
rated this
5/5
★★★★★
For the price this is an excellent little pump. Great service from plumworld too, much cheaper than screwfix and free wick delivery was a plus.
5/ 5
Gary McNulty
rated this
5/5
★★★★★
if you just want to boost the hot water pressure, this is perfect
5/ 5
Brad
rated this
5/5
★★★★★
Those what it says on the tin , reasonably priced
Shower pump
5/ 5
Debbie Hart
rated this
5/5
★★★★★
Excellent no pressure my Plummer fitted this solved the problem
5/ 5
Ramesh Kalyan
rated this
5/5
★★★★★
Very good product
4/ 5
David Wotherspoon
rated this
4/5
★★★★☆
Fitted this to the shower feed to overcome low/ fluctuating pressure from the mains.
Instructions said not to fit this to a mains supply so fitted it to a new supply from the header tank. The pump is level with the bottom of the tank and only just provides enough head to get the pump working.
So the pump works fine just needs to be placed correctly, beware!
